Venture XT 3030 - CNC
Fowler Baty Venture XT 3030 CNC Venture XT CNC with Fusion 3D software, (X) 11.8"/300mm x (Y) 11.8"/300mm x (Z) 7.9"/200mm, includes controller and 2, 19" monitors Venture XT CNC models take the power of Fusion software one stage further by completely automating the inspection process. Using a combination of non-contact (camera) and contact (touch probe) methods, advanced measurements including scanning and best fitting can be completed in a single automated inspection, without taking up the time of skilled operators. CNC programming is a simple teach and repeat process. Just measure the part once and a full CNC program is created automatically. The zoom lens can also be controlled so that magnification changes are all recorded into the program. CNC programs can also be created offline from CAD models. Large Measurement Volume The use of a touch probe is optimized on a CNC system. Measurements from data points taken using the touch probe can be combined with those taken using
Specifications XYZ Measuring Range: 11.8""/300mm x 11.8""/300mm x 7.8""/200mm Workstage Area: 464mm x 462mm Max Workpiece Load: 55 lb/ 25 kg Drive Type CNC/joystick Max Dive Speed 200mm/sec Bearings Cross roller rail guide Camera Type 2048 x 1590 pixel color USB2 camera with 8 x 9mm chip and dynamic latch Optics/Lighting 6.5:1 CNC zoom lens. Full programmable software controlled white LED segmented surface lighting head with understage and through the lens (TTL) lighting as standard Resolution 0.0005mm Accuracy 2 + L/100 Max Field of View 16mm (using optional 0.5x adapter lens) Magnification 20x 350x Touch Probe Option Available Yes Probe Type Renishaw TP20 Scanning probe Change rack compatible? Yes